Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped functioning one day it could be due to a dead battery in the coin or water damage or receiver module issues, or a faulty electronic chip. Luckily, all of these are easy to fix and you'll get your vehicle back to normal in no time!
Car keys can also get damaged due to the fact that the blade on the key gets worn. It is easy to fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them install the new key blade for you.
Battery
The key fob inside your Peugeot 308 may die or become weak enough to not send a strong signal. The key fob can stop working and prevent you from locking or unlocking your doors or even starting your engine. You'll need a new battery on the key fob in order to fix this.
You'll need to purchase batteries for replacement from an auto parts store or a local hardware store. When you purchase the battery make sure that it's brand fresh and hasn't just been sitting on the shelf for a long time. A new battery has greater capacity and can send a stronger signal to your vehicle.
After replacing The KeyLab , try unlocking the doors and locking them with the key fob. If the doors won't open, the problem is likely to be with the receiver module of your car which can be programmed by your local Peugeot dealer.
It's possible that the chip inside your key fob is damaged. It's possible to damage your key fob if you drop it on the ground, or expose it to water. The rubber seals that protect the chip from moisture could be worn down over time, especially if your key fob is exposed to water for extended durations, like submerging it in the ocean at the beach. To prevent this from occurring, it's crucial to keep your key fob safe from moisture and not let it come into contact with water.
Water Damage
If your key fob is wet regardless of whether you dropped it into the pool or fumbled it into a puddle, don't assume it's a lost cause. While the key fob has rubber seals which should shield it from water, prolonged exposure to water can result in damage to its electronic chip. Since water is such a good conductor and conductor, any water that gets inside the key fob may cause a chain of short circuits that eventually ruin the chip. After removing the batteries, clean the contact surfaces with isopropyl, and then dry them completely before putting them back into.
A dead battery can also be the reason why your Peugeot 308 won't start. If you have a spare vehicle, jumper cables can be used to start the engine again. If you suspect that the battery is at fault then it must be replaced.
A malfunctioning receiver in the car can also prevent it from receiving the signal from the key fob. The key fob may be damaged, or there could be a problem with the antenna, wiring or even the key fob itself. If you have an entirely new key fob, it could need to be programmed to your vehicle. If you're unable to solve the issue, call a professional technician. A professional who has been trained in the field will be able to detect the issue quickly and resolve it quickly.
Radio Interference
Symptoms such as key fobs that are not recognized or with a limited range often mean that there is a problem with the system. The interference could be radiated or transmitted, the latter caused by power cables and speaker cables being too close to electrical parts. In general, rerouting cables or moving them away from these components will fix the issue.
It's unlikely that someone is monitoring your key fob signals to steal your car, however it's possible that the signal is being distorted by radio frequency interference. Luckily, this is a simple issue to repair.
If you're having issues with your key fobs that aren't being recognized, try using a new battery. Make sure that the battery is of the correct size and type. Batteries that are not of the correct size can cause damage to your device.
These devices can interfere with the key signal if they are using the same radio frequency. It is recommended to avoid having these devices attached to your key fob.
Pairing Issues
The remote keyless entry system of cars has a receiver that receives radio signals from the key fob. If the receiver has developed problems, you won't be in a position to start your car regardless of whether the key fob functions and is changed. This issue could be caused in a number different ways, such as an inoperative battery on the coin-cell or water damage. The receiver could also be failing due to a software error or internal damage in the key.
The battery that powers your Peugeot 308 keyfob may have died. You can easily replace this by using a fresh battery, but it's essential to select the correct battery for your key fob. If you use a battery that is not correct, it could lead to further problems with the key fob, so it is recommended to use either the original or an alternative that is similar in size, voltage and specification.
Your Peugeot 308 keyfob may not function if connected to another vehicle. It is possible that you have accidentally given your key fob away to someone else or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. This tool will ask for information about your car, including its VIN or engine type. It is important to enter the correct details.